BPLPB - BX103, DIAMOND/CUBIC BORON NITRIDE GRINDING
- MSDS: BPLPB
- Manufacturer: NORTON CO
- Product Name: BX103, DIAMOND/CUBIC BORON NITRIDE GRINDING
- National Stock Number: 5130-00N031721
Product Identification
Product ID:BX103, DIAMOND/CUBIC BORON NITRIDE GRINDING
MSDS Date:06/18/1986
FSC:5130
NIIN:00N031721
MSDS Number: BPLPB
Responsible Party
WORCESTER, MA 01606-2698
US
Emergency Phone: 617-795-2690
Info Phone: 617-795-2690
Cage: 44197
Contractor
Telephone: 508-795-2690/508-795-5000
Cage: 44197
Ingredients
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 30%
OSHA PEL 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2MG/M3 FUME/1 DUST
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TIN
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 25%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
GRAPHITE (MFR CAS#7882-42-5)
CAS: 7782-42-5
RTECS: MD9659600
Fraction By Weight: 25%
OSHA PEL 15 MPPCF RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9293
CALCIUM OXIDE; (LIME)
CAS: 1305-78-8
RTECS: EW3100000
Fraction By Weight: 5%
OSHA PEL 5 MG/M3
ACGIH TLV: 2 MG/M3
SILICON CARBIDE; (CRYSTOLON)
CAS: 409-21-2
RTECS: VW0450000
Fraction By Weight: 20%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
SILVER (SARA III)
CAS: 7440-22-4
RTECS: VW3500000
Fraction By Weight: 15%
OSHA PEL 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
FLUORIDES (AS F)
Fraction By Weight: 10%
OSHA PEL 2.5 MG/M3 (AS F)
ACGIH TLV: 2.5 MG/M3 (AS F)
COBALT (SARA III)
CAS: 7440-48-4
RTECS: GF8750000
Fraction By Weight: 65%
OSHA PEL 0.1 MG/M3;AS CO
ACGIH TLV: 0.05 MG/M3;DUST 9293
CHROMIUM, ION (CR 3+); (CHROMIUM SALTS (TRIVALENT))
CAS: 16065-83-1
RTECS: GB6261000
Fraction By Weight: 7%
OSHA PEL 0.5 MG/M3 (CR)
ACGIH TLV: 0.5 MG/M3 (CR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) INHALATION: COUGHING,
SHORTNESS OF BREATH. INGESTION: NO KNOWN ADVERSE EFFECTS, BUT
INGESTION NOT RECOMMENDED. SKIN: SOME MAY EXPERIENCE SKIN
IRRITATION FROM DUST. EYE: DUSTS MAY IRRITATE EYES . OTHER
POTENTIAL HEALTH RISKS: GRINDING MAY CREATE ELEVATED SOUND LEVELS
WHICH MAY AFFECT HEARING. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: (CHRONIC) INHALATION: MAY AFFECT
BREATHING CAPACITY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. ARTIFICIAL RESPIRATION AS
NEEDED. OBTAIN MEDICAL ASSISTANCE. INGESTION: OBTAIN MEDICAL
ASSISTANCE. SKIN: WASH AFFECTED AREAS WITH SOAP AND WATER. OBTAIN
MEDICAL ASSIST ANCE. EYE: WASH WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES. OBTAIN FIRST AID AND MEDICAL ASSISTANCE, IF
NEEDED.
Fire Fighting
Extinguishing Media:USE WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:NORMAL CLEANUP PROCEDURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:AS NEEDED. USE NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN . FOR APPROVED DUST RESPIRATORS
SEE OSHA 29 CFR 1910.134.
Ventilation:LOCAL OR MECHANICAL RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS NEEDED. HEARING PROTECTION SEE OSHA 29
CFR 1910.215 (HEARING PROTECTION).
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
TRADE NAME/PART #: WHEELS BOND TYPE. HAZ DECOMP PRODS: GREATER THAN
GRINDING WHEEL COMPONENTS. COOLANTS MAY PRODUCE OTHER DECOMPOSITION
PRODUCTS.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>428F,>220C
Spec Gravity:2-4
Solubility in Water:SLIGHT
Appearance and Odor:SOLID PRODUCT: MAY GIVE OFF ODOR IN USE.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:IN USE, DUST/DECOMPOSING ORG FUMES ARE
GENERATED.IN MOST CASES,MATL REMOVED FROM WORKPIECE WILL BE
SIGNIFICANTLY(SUPDAT)
Disposal
Waste Disposal Methods:STANDARD LANDFILL METHODS CONSISTENT WITH
APPLICABLE FEDERAL, STATE AND LOCAL LAWS. PRODUCTS WITH LISTED
FLUORIDES MAY HAVE SLIGHTLY SOLUBLE FLUORIDE SWARF.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.